A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other.
184-pin DIMMs are used to provide DDR SDRAM memory for desktop computers. Standard 184-pin DIMMs are available in PC1600 DDR SDRAM, PC2100 DDR SDRAM, PC2700 DDR SDRAM, and PC3200 DDR SDRAM.
To use DDR memory, your system motherboard must have 184-pin DIMM slots and a DDR-enabled chipset. A DDR SDRAM DIMM will not fit into a standard SDRAM DIMM socket. (Information about which memory technology your system uses is included in the Crucial Memory Advisor tool.)
The number of black components on a 184-pin DIMM can vary, but it always has 92 pins on the front and 92 pins on the back, for a total of 184. 184-pin DIMMs are approximately 5.25 inches long and 1.25 inches high, though the heights can vary. While 184-pin DIMMs and 168-pin DIMMs are approximately the same size, 184-pin DIMMs have only one notch within the row of pins.
|Manufacturer Part Number:||CT2KIT12864Z335|
|Manufacturer Website Address:||http://www.crucial.com|
|Product Name:||2GB DDR SDRAM Memory Module|
|Product Type:||RAM Module|
|Memory Size:||2 GB|
|Memory Technology:||DDR SDRAM|
|Number of Modules:||2 x 1 GB|
|Memory Speed:||333 MHz|
|Device Supported:||Desktop PC|
|Number of Pins:||184-pin|
Gigabyte GA-8IPE1000-G Desktop Motherboard