Ordered parts on the Thursday and they showed up at my door on the Friday. Part functioned exactly as advertised and the price was one of the lowest on the net. Cant ask for any better!
Configure your Lexmark
Bins 1 and 2 support various plain, recycled or bond papers and glossy paper (16 to 68 lb., 60 to 256 gsm) in A3, A4, Executive, JIS-B4, JIS-B5, Letter, Legal and Ledger (Tabloid) sizes. The upper bin 1 supports up to 200 sheets of paper with hole punching. Bin 1 has a full sensor. The lower bin 2 supports up to 3200 sheets of paper with stapling, hole punching and offset stacking. Each stapled set may contain up to 50 sheets for 4-position stapling (5,000 staples capacity). Bin 2 has a full sensor. The standard output bin capacity is reduced to 100 sheets when using a floor standing finisher. The lower bin capacity is reduced when stapling is utilized. Hole punching and offset stacking are supported to Bin 2 only. The 2500-Sheet Tandem Tray or 2x 500-Sheet Tray is required to raise the printer or MFP to the correct height for use with the Finisher.
|Manufacturer:||Lexmark International, Inc|
|Manufacturer Part Number:||26Z0081|
|Manufacturer Website Address:||http://www.lexmark.ca|
|Product Name:||MS911, MX91x Staple Punch Finisher (3-Hole)|
|Media Type:||Plain Paper, Recycled Paper, Bond Paper, Glossy Paper|
|Media Size:||A3, A4, Executive, B4 (JIS), B5 (JIS), Ledger, Letter, Legal, SRA3|
|Height:||41.9" (1065 mm)|
|Width:||25.2" (641 mm)|
|Depth:||25.9" (658 mm)|
|Weight (Approximate):||43.20 kg|
|Country of Origin:||China|